Aminian, Hedayatollah
The possibility of using waste tire particles for oriented strand board production [Volume 37, Issue 2, 2022, Pages 113-127]
Asadpour, Ghasem
The effect of kappa factor on chlorine dioxide bleaching sequence on the properties of dissolving pulp from recycled fibers (OCC) [Volume 37, Issue 1, 2022, Pages 28-37]
Asadpour, Ghasem
The effect of kappa factor changes in chlorine dioxide bleaching on the dissolution of pulp from OCC recycled fibers in sodium hydroxide / urea solvent [Volume 37, Issue 2, 2022, Pages 166-176]
Asadpour Atoi, Ghasem
The effect of using bulking agents on the physical and strength properties of the medium corrugated board made by NSSC and OCC [Volume 37, Issue 3, 2022, Pages 193-203]
Ashori, Alireza
Investigation of the effect of heat treatment and nanoparticles on wettability and transparent adhesion resistance of lacquer coating [Volume 37, Issue 1, 2022, Pages 59-72]
Ashrafi, Sayed Sajad
Identification and Comparison of the Extractives Chemical Components in Wood and Bark of Planted sycamore Tree (Platanus orientalis) by GC-MS Methods [Volume 37, Issue 3, 2022, Pages 229-238]
Azizi, Majid
Analysis and investigation the structure of wooden bedroom furniture import market in Iran [Volume 37, Issue 1, 2022, Pages 38-58]
B
Bazyar, Behzad
Investigating the effect of lignin on the negative effects of the torrefaction process in the production of briquettes from bagasse [Volume 37, Issue 4, 2022, Pages 346-360]
D
Dadmohamadi, Kobra
The effect of cellulose nanofibers treatment on the discoloration of historical papers [Volume 37, Issue 1, 2022, Pages 73-85]
Ebadi, Seyed Eshagh
Identification and Comparison of the Extractives Chemical Components in Wood and Bark of Planted sycamore Tree (Platanus orientalis) by GC-MS Methods [Volume 37, Issue 3, 2022, Pages 229-238]
Ebadi, Seyed Eshagh
Identification and comparison of organic chemical components in leaves of the planted Elder Pine (Pinus eldarica) and Sycamore (Platanus orientalis) using GC-MS methods [Volume 37, Issue 3, 2022, Pages 261-270]
Ebrahimi, Ghanbar
Performance assessment of bending and shear stiffness of hybrid Beech-Poplar cross-laminated timber (CLT) using experimental and finite element methods [Volume 37, Issue 2, 2022, Pages 99-112]
Ebrahimpour Kasmani, Jafar
Investigation of the independent and combined effect of different additives on the properties of liner and fluting paper made from OCC [Volume 37, Issue 3, 2022, Pages 204-216]
Elyasy, Abdolah
Investigation of antibacterial properties of melamine coatings containing chitosan and clay nanofibers [Volume 37, Issue 3, 2022, Pages 239-250]
F
Faraji, Farshid
The possibility of using waste tire particles for oriented strand board production [Volume 37, Issue 2, 2022, Pages 113-127]
Farsi, Mohammad
Comparison of the effect of walnut shell and charcoal flour on the characteristics of wood-plastic composites [Volume 37, Issue 2, 2022, Pages 128-140]
Ghahrani, Negin
The effect of kappa factor on chlorine dioxide bleaching sequence on the properties of dissolving pulp from recycled fibers (OCC) [Volume 37, Issue 1, 2022, Pages 28-37]
Ghahrani, Negin
The effect of kappa factor changes in chlorine dioxide bleaching on the dissolution of pulp from OCC recycled fibers in sodium hydroxide / urea solvent [Volume 37, Issue 2, 2022, Pages 166-176]
Ghahri, Saman
Study on Mechanical Properties of Kenaf-Cement Composite [Volume 37, Issue 2, 2022, Pages 141-149]
Ghahri, Saman
Mechanical and physical properties of plywood bonded with Bio-based Soy-tannin adhesive [Volume 37, Issue 3, 2022, Pages 251-260]
Ghahri, Saman
Evaluation of engineering characteristics of decayed thermo-wood by brown rot fungus [Volume 37, Issue 4, 2022, Pages 306-317]
Ghasemi, Esmail
Effect of Gamma-Ray on the Physical, Mechanical, Morphological and, Biological durability Properties of WPC Composite [Volume 37, Issue 1, 2022, Pages 86-98]
Ghasemian, Ali
The effect of using bulking agents on the physical and strength properties of the medium corrugated board made by NSSC and OCC [Volume 37, Issue 3, 2022, Pages 193-203]
Ghofrani, Mohammad
Investigation of the effect of heat treatment and nanoparticles on wettability and transparent adhesion resistance of lacquer coating [Volume 37, Issue 1, 2022, Pages 59-72]
Ghofrani, Mohammad
The Effect of alumina nanoparticles on adhesion strength of clear varnishes applied on walnut and spruce wood [Volume 37, Issue 4, 2022, Pages 271-281]
Gholamiyan, Hadi
Analysis and investigation the structure of wooden bedroom furniture import market in Iran [Volume 37, Issue 1, 2022, Pages 38-58]
Gholamiyan, Hadi
The effect of the bacteria of nano fiber cellulose on the functional properties of cementitious structures [Volume 37, Issue 4, 2022, Pages 293-305]
Gholampoor, Behnam
Analysis and investigation the structure of wooden bedroom furniture import market in Iran [Volume 37, Issue 1, 2022, Pages 38-58]
Golbabaei, Fardad
Study on Mechanical Properties of Kenaf-Cement Composite [Volume 37, Issue 2, 2022, Pages 141-149]
Gudarzi, Elham
Assessment of Customer Expectations and Preferences in Home and Office Furniture Purchase Process with Non-parametric Tests [Volume 37, Issue 1, 2022, Pages 1-16]
H
Habib Porian, Mohamad Hossien
Identification and Comparison of Organic Chemical Components in Wood and Bark of Hornbeam and Ironwood Wood by GC-MS Methods [Volume 37, Issue 2, 2022, Pages 150-165]
Hajihassani, Reza
Study on Mechanical Properties of Kenaf-Cement Composite [Volume 37, Issue 2, 2022, Pages 141-149]
Hajihassani, Reza
Mechanical and physical properties of plywood bonded with Bio-based Soy-tannin adhesive [Volume 37, Issue 3, 2022, Pages 251-260]
Hajihassani, Reza
Evaluation of engineering characteristics of decayed thermo-wood by brown rot fungus [Volume 37, Issue 4, 2022, Pages 306-317]
Hasanpoor tichi, Ali
The effect of the bacteria of nano fiber cellulose on the functional properties of cementitious structures [Volume 37, Issue 4, 2022, Pages 293-305]
Hatefnia, Hamid
Evaluation of the internal defaults and decay in old timber in building using non-destructive ground penetration radar (GPR) method [Volume 37, Issue 3, 2022, Pages 217-228]
Hematabadi, Hojat
Performance assessment of bending and shear stiffness of hybrid Beech-Poplar cross-laminated timber (CLT) using experimental and finite element methods [Volume 37, Issue 2, 2022, Pages 99-112]
Hemmasi, Amir Hooman
Effect of Gamma-Ray on the Physical, Mechanical, Morphological and, Biological durability Properties of WPC Composite [Volume 37, Issue 1, 2022, Pages 86-98]
Hoseinpour, Samad
Investigation of the effect of heat treatment and nanoparticles on wettability and transparent adhesion resistance of lacquer coating [Volume 37, Issue 1, 2022, Pages 59-72]
J
Jafari, Mohammad taghi
The effect of cellulose nanofibers treatment on the discoloration of historical papers [Volume 37, Issue 1, 2022, Pages 73-85]
Jahan latibari, Ahmad
Assessment of Customer Expectations and Preferences in Home and Office Furniture Purchase Process with Non-parametric Tests [Volume 37, Issue 1, 2022, Pages 1-16]
K
Kazemi, Rahim
The possibility of using waste tire particles for oriented strand board production [Volume 37, Issue 2, 2022, Pages 113-127]
Kazemi Karchegini, negin
Application of Soybean Waste as Adsorbent of Remozol Black B from Aqueous Solution [Volume 37, Issue 4, 2022, Pages 318-329]
Kazemi Karchegini, zahra
Application of Soybean Waste as Adsorbent of Remozol Black B from Aqueous Solution [Volume 37, Issue 4, 2022, Pages 318-329]
Khademi Eslam, Habibollah
Investigating the effect of lignin on the negative effects of the torrefaction process in the production of briquettes from bagasse [Volume 37, Issue 4, 2022, Pages 346-360]
Khasipour, Farzin
Competitiveness model for laminate flooring industry with non-parametric tests [Volume 37, Issue 2, 2022, Pages 177-192]
Khazaeian, Abolghasem
Performance assessment of bending and shear stiffness of hybrid Beech-Poplar cross-laminated timber (CLT) using experimental and finite element methods [Volume 37, Issue 2, 2022, Pages 99-112]
M
Madanipour, Mostafa
Comparison of the effect of walnut shell and charcoal flour on the characteristics of wood-plastic composites [Volume 37, Issue 2, 2022, Pages 128-140]
Madhoushi, Mehrab
Performance assessment of bending and shear stiffness of hybrid Beech-Poplar cross-laminated timber (CLT) using experimental and finite element methods [Volume 37, Issue 2, 2022, Pages 99-112]
Madhoushi, Mehrab
Evaluation of the internal defaults and decay in old timber in building using non-destructive ground penetration radar (GPR) method [Volume 37, Issue 3, 2022, Pages 217-228]
Mahdavi, Saeed
Investigation of the independent and combined effect of different additives on the properties of liner and fluting paper made from OCC [Volume 37, Issue 3, 2022, Pages 204-216]
Mansouri, Hamidreza
Investigation of antibacterial properties of melamine coatings containing chitosan and clay nanofibers [Volume 37, Issue 3, 2022, Pages 239-250]
Mashkour, Mahdi
A study on the protective effect of nano zinc oxide against weathering of wood-polypropylene composite [Volume 37, Issue 1, 2022, Pages 17-27]
Mohammadi Achachluei, Mohsen
The effect of cellulose nanofibers treatment on the discoloration of historical papers [Volume 37, Issue 1, 2022, Pages 73-85]
Mohebi, Nemat
Analysis and investigation the structure of wooden bedroom furniture import market in Iran [Volume 37, Issue 1, 2022, Pages 38-58]
Mousavi, Mir Reza
Comparison of the effect of walnut shell and charcoal flour on the characteristics of wood-plastic composites [Volume 37, Issue 2, 2022, Pages 128-140]
N
Nasiri, Seyed atefe
The effect of using bulking agents on the physical and strength properties of the medium corrugated board made by NSSC and OCC [Volume 37, Issue 3, 2022, Pages 193-203]
Nazarnezhad, Noradin
The effect of kappa factor changes in chlorine dioxide bleaching on the dissolution of pulp from OCC recycled fibers in sodium hydroxide / urea solvent [Volume 37, Issue 2, 2022, Pages 166-176]
Nazrneghad, Noraldin
The effect of kappa factor on chlorine dioxide bleaching sequence on the properties of dissolving pulp from recycled fibers (OCC) [Volume 37, Issue 1, 2022, Pages 28-37]
Neyciyani, Behrouz
Analysis and investigation the structure of wooden bedroom furniture import market in Iran [Volume 37, Issue 1, 2022, Pages 38-58]
P
Pizzi, Antonio
Mechanical and physical properties of plywood bonded with Bio-based Soy-tannin adhesive [Volume 37, Issue 3, 2022, Pages 251-260]
Pourmousa, Shademan
Assessment of Customer Expectations and Preferences in Home and Office Furniture Purchase Process with Non-parametric Tests [Volume 37, Issue 1, 2022, Pages 1-16]
Pourmousa, Shademan
Competitiveness model for laminate flooring industry with non-parametric tests [Volume 37, Issue 2, 2022, Pages 177-192]
R
Ramezani, Omid
The effect of kappa factor on chlorine dioxide bleaching sequence on the properties of dissolving pulp from recycled fibers (OCC) [Volume 37, Issue 1, 2022, Pages 28-37]
Ramezani, Omid
The effect of kappa factor changes in chlorine dioxide bleaching on the dissolution of pulp from OCC recycled fibers in sodium hydroxide / urea solvent [Volume 37, Issue 2, 2022, Pages 166-176]
Rasouli, Davood
A study on the protective effect of nano zinc oxide against weathering of wood-polypropylene composite [Volume 37, Issue 1, 2022, Pages 17-27]
Roohnia, Mehran
Assessment of Customer Expectations and Preferences in Home and Office Furniture Purchase Process with Non-parametric Tests [Volume 37, Issue 1, 2022, Pages 1-16]
Roohnia, Mehran
Competitiveness model for laminate flooring industry with non-parametric tests [Volume 37, Issue 2, 2022, Pages 177-192]
Roohnia, Mehran
Detection and differentiation of the beech tree knot (Fagus orientalis Libsky) by non-destructive stress wave method [Volume 37, Issue 4, 2022, Pages 282-292]
S
Safdari, Vahid reza
Competitiveness model for laminate flooring industry with non-parametric tests [Volume 37, Issue 2, 2022, Pages 177-192]
Salehi, Kamyar
Study on Mechanical Properties of Kenaf-Cement Composite [Volume 37, Issue 2, 2022, Pages 141-149]
Salehi, Kamyar
Evaluation of engineering characteristics of decayed thermo-wood by brown rot fungus [Volume 37, Issue 4, 2022, Pages 306-317]
Salehi, Majid
Investigating the effect of lignin on the negative effects of the torrefaction process in the production of briquettes from bagasse [Volume 37, Issue 4, 2022, Pages 346-360]
Samariha, Ahmad
Investigation of the independent and combined effect of different additives on the properties of liner and fluting paper made from OCC [Volume 37, Issue 3, 2022, Pages 204-216]
Shakeri, Alireza
Investigation of antibacterial properties of melamine coatings containing chitosan and clay nanofibers [Volume 37, Issue 3, 2022, Pages 239-250]
Shojaie, Mohammad hamed
Effect of Gamma-Ray on the Physical, Mechanical, Morphological and, Biological durability Properties of WPC Composite [Volume 37, Issue 1, 2022, Pages 86-98]
T
Tabarsa, Taghi
Investigation of antibacterial properties of melamine coatings containing chitosan and clay nanofibers [Volume 37, Issue 3, 2022, Pages 239-250]
Tabei, Asghar
Comparison of the effect of walnut shell and charcoal flour on the characteristics of wood-plastic composites [Volume 37, Issue 2, 2022, Pages 128-140]
Tajdini, Ajang
Assessment of Customer Expectations and Preferences in Home and Office Furniture Purchase Process with Non-parametric Tests [Volume 37, Issue 1, 2022, Pages 1-16]
Tajdini, Ajang
Competitiveness model for laminate flooring industry with non-parametric tests [Volume 37, Issue 2, 2022, Pages 177-192]
Talaei poor, Mohammad
Effect of Gamma-Ray on the Physical, Mechanical, Morphological and, Biological durability Properties of WPC Composite [Volume 37, Issue 1, 2022, Pages 86-98]
Talaei poor, Mohammad
Investigating the effect of lignin on the negative effects of the torrefaction process in the production of briquettes from bagasse [Volume 37, Issue 4, 2022, Pages 346-360]
Tasooji, Mohammad
Physical and Mechanical Properties of Acrylated Epoxidized Soybean Oil- Wheat Straw Composite [Volume 37, Issue 4, 2022, Pages 330-345]
Torkaman, Javad
Detection and differentiation of the beech tree knot (Fagus orientalis Libsky) by non-destructive stress wave method [Volume 37, Issue 4, 2022, Pages 282-292]
V
Vaysi, Ramin
Identification and Comparison of Organic Chemical Components in Wood and Bark of Hornbeam and Ironwood Wood by GC-MS Methods [Volume 37, Issue 2, 2022, Pages 150-165]
Vaysi, Ramin
Identification and Comparison of the Extractives Chemical Components in Wood and Bark of Planted sycamore Tree (Platanus orientalis) by GC-MS Methods [Volume 37, Issue 3, 2022, Pages 229-238]
Vaziri, Vahid
The possibility of using waste tire particles for oriented strand board production [Volume 37, Issue 2, 2022, Pages 113-127]
Y
Yousefi, Hossein
A study on the protective effect of nano zinc oxide against weathering of wood-polypropylene composite [Volume 37, Issue 1, 2022, Pages 17-27]
